Product Overview
Automated laser welding requires consistent robot positioning, coordinated process control and a workstation suited to the workpiece and welding method. This six-axis robot provides the motion platform and welding-related control functions needed to build an automated laser welding solution.
Its extended reach and 20 kg payload support the integration of suitable welding tools and peripheral equipment. For wobble laser welding applications, the robot can be incorporated into a system using a compatible wobble welding head and laser source, with the final setup selected according to workpiece geometry, joint access and production requirements.
Technical Specifications
Robot Parameters
|
Parameter |
Specification |
|
Number of Axes |
6 |
|
Maximum Payload |
20 kg |
|
Operating Radius |
1821 mm |
|
Repeatability |
±0.05 mm |
|
Robot Weight |
288 kg |
|
Mounting Options |
Floor, inverted, side |
|
Body Protection Rating |
IP54 |
|
Wrist Protection Rating |
IP67 |
|
Body Interface |
16-pin, 2 × Φ8 mm |
|
Operating Temperature |
0–45°C |
|
Operating Humidity |
20–80% RH, non-condensing |
Axis Motion Range
|
Axis |
Motion Range |
|
J1 - Floor or Inverted Mounting |
-165° to +165° |
|
J1 - Wall Mounting |
-30° to +30° |
|
J2 |
-155° to +105° |
|
J3 |
-90° to +135° |
|
J4 |
-190° to +190° |
|
J5 |
-90° to +110° |
|
J6 |
-210° to +210° |
Joint Performance
|
Parameter |
J1 |
J2 |
J3 |
J4 |
J5 |
J6 |
|
Maximum Speed (°/s) |
160 |
160 |
169 |
301 |
342 |
708 |
|
Parameter |
J4 |
J5 |
J6 |
|
Allowable Torque (N·m) |
55 |
55 |
24 |
|
Allowable Inertia (kg·m²) |
2.1 |
2.1 |
0.16 |
Key Features
Six-Axis Motion for Flexible Welding Access
The six-axis structure allows the welding tool to approach workpieces from different angles. This supports robotic welding layouts involving varied part orientations and access requirements, subject to the robot's reach, joint limits and tooling clearance.
Dedicated Laser Welding Control
The control system supports welding-related functions including:
• Laser power control
• Soft start and soft stop
• Pre-attenuation
• Wire-feeding control
• Wire-sticking detection
• Pre-drawing and wire replenishment functions
These functions support coordination between robot motion and the welding process. Actual process performance depends on the selected laser source, welding head, wire-feeding equipment and application parameters.
Payload and Reach for Workstation Integration
A maximum payload of 20 kg and operating radius of 1821 mm provide a basis for selecting suitable end-of-arm tooling and arranging the welding workstation. Tool weight, cable routing, workpiece access and the required working envelope should be considered during cell design.
Flexible Installation
Floor, inverted and side mounting options support different production layouts. The mounting position should be selected according to the required working area, joint motion limits and surrounding equipment.
Standard Equipment and Optional Components
Standard Equipment
• G5A control cabinet
• Vertical teach pendant with 6 m cable
• Two operation boxes with 5 m cables
• 5 m cabinet-to-robot cable
• Welding wire drum and stand
Optional Equipment
• Two external axes
Welding System Integration
The robot forms part of the automated welding solution. The laser source, wobble welding head, fixtures, safety enclosure and other peripherals should be specified according to the intended application rather than assumed to be included in the standard supply.
Wire-feeding control functions and the supplied wire drum and stand are not, by themselves, confirmation that every component of a complete wire-feeding system is included. The required drive, feeder and related accessories should be specified as part of the workstation scope.
Explore CRP's Automation Solutions
Applications
Automated Laser Welding for Metal Fabrication
The robot can serve as the motion platform for automated laser welding tasks where the workpiece, tooling and welding system fit its payload and working envelope.
- Stainless Steel Components: Robotic welding of suitable stainless steel parts and assemblies.
- Aluminum Alloy Parts: Automated welding applications using a compatible laser source and welding process.
- Sheet Metal Assemblies: Welding of fabricated sheet metal components with suitable joint access and fixturing.
- Industrial Metal Fabrication: Integration into production cells for repeatable robotic welding operations.
Material compatibility and weld quality depend on the laser source, wobble welding head, joint design, material thickness, fixtures and process parameters. Cutting and cladding are not included here as standard applications.
Manufacturing and Quality Control
CRP applies quality checks across material inspection, component production, assembly and final inspection to support consistent robot manufacturing.
- Incoming Material Inspection: Checks materials and components before they enter production.
- Dimensional Inspection: Three-coordinate measurement supports dimensional verification.
- Production Traceability: QR-code traceability helps track relevant production information.
- Assembly and Performance Checks: Inspection and performance testing are conducted during manufacturing.
- Maximum-Load Aging: A 24-hour maximum-load aging process is used as part of robot quality control.
- Final Inspection: Finished robots undergo inspection before delivery.
These controls support robot quality and operational reliability. Welding results for a specific workpiece are established through appropriate application trials and process validation.
Technical Support
CRP provides technical support to help customers implement and maintain robotic automation systems.
- Installation and Commissioning: Support for robot installation and initial system setup.
- Operator Training: Training to help users operate the robot and understand its control functions.
- Troubleshooting: Assistance with diagnosing and resolving robot-related issues.
- On-Site Support: Available according to project location and service arrangements.
- After-Sales Service: Robot warranty and subsequent repair or replacement support are subject to the applicable service terms.
FAQ
Q: What information is needed to select a laser welding robot?
A: Provide the workpiece dimensions and weight, material type and thickness, welding joint details, required working positions, production target and proposed laser equipment. These details help assess payload, reach, tooling and workstation requirements.
Q: Does the robot include the laser source and wobble welding head?
A: The listed standard equipment includes the robot control and operating components, as well as a welding wire drum and stand. The laser source, wobble welding head, fixtures and safety enclosure are not listed as standard equipment and should be specified separately according to the project scope.
Q: Can the robot be integrated into an existing production line?
A: Integration can be assessed based on the existing equipment, robot mounting position, available space, control interfaces, safety arrangements and production sequence. Sharing the current line layout and equipment details helps determine the required integration work.
Q: How can the robot's suitability for a specific welding task be assessed?
A: Evaluate the workpiece geometry, tool weight, reach, joint access, mounting position and required motion. A welding trial using the intended material, joint design, laser source and wobble welding head can help assess process suitability and weld quality.
Q: What after-sales support is available?
A: CRP lists a two-year robot warranty, repair support for up to five years after product discontinuation and replacement support for up to ten years. Applicable terms and service arrangements should be reviewed for the specific purchase.
Hot Tags: wobble laser welding robot, China wobble laser welding robot manufacturers, suppliers, factory

