1000W / 1500W Laser Welding Robot

1000W / 1500W Laser Welding Robot

Details
• Laser Power Options: 1000W / 1500W
• Robot Axes: 6
• Maximum Payload: 12 kg
• Operating Radius: 1554 mm
• Repeatability: ±0.05 mm
• Mounting Options: Floor, inverted, or side mounting
Category
Laser Welding Robots
Share to
Send Inquiry
Description
Technical Parameters

Product Overview

 

Choosing a robotic laser welding system involves more than selecting the robot arm. Laser power, welding process requirements, workpiece geometry, wire feeding, and workstation layout all affect how the equipment fits into a production line.
The 1000W / 1500W Laser Welding Robot combines a six-axis industrial robot, an electrical control cabinet, and dedicated laser welding software. This arrangement supports automated torch-path movement and coordinated control of the welding process within a robotic workstation.

 

 

Key Features

Two Laser Power Options

The 1000W and 1500W options give buyers a choice when planning a laser welding cell. Selection should take into account the workpiece, joint design, welding procedure, and required production outcome rather than power rating alone.

Dedicated Laser Process Control

The control system supports laser power control and welding-related functions, including soft start and stop, pre-attenuation, wire-sticking detection, pre-drawing, and wire filling. These functions help coordinate process actions during automated welding.

Six-Axis Robotic Movement

A six-axis arm with a 12 kg payload and a 1554 mm operating radius supports flexible positioning around the workpiece. Repeatability of ±0.05 mm is specified for applications requiring consistent robot positioning.

Wire Feeding Support

The system supports dual-mode servo and stepper-motor wire feeding for welding wire diameters from 0.6 to 2.0 mm. This provides a wire-feeding option for applications that use filler wire, including stainless steel and aluminum welding processes, subject to the selected welding procedure and compatible equipment.

Compact Control Cabinet and Backup Power

The G5A control cabinet is specified as 35% smaller than the referenced conventional cabinet design and supports single-phase 220V power. An integrated industrial UPS is designed to switch to backup power within 5 ms or less.

Vertical Teaching Pendant

A vertical teaching pendant supports robot teaching and programming. Its interface is intended to simplify operator interaction when setting up and adjusting welding paths.

 

 

Technical Parameters

 

Item

Specification

Model

CRP-RA15-12-J

Number of Axes

6

End Load

12 kg

Operating Radius

1554 mm

Repeatability

±0.05 mm

J1 Axis Range

Floor / Inverted: -167° to +167°; Wall: -30° to +30°

J2 Axis Range

-155° to +90°

J3 Axis Range

-85° to +155°

J4 Axis Range

-190° to +190°

J5 Axis Range

-105° to +130°

J6 Axis Range

-210° to +210°

J1 Maximum Speed

169°/s

J2 Maximum Speed

169°/s

J3 Maximum Speed

169°/s

J4 Maximum Speed

301°/s

J5 Maximum Speed

220°/s

J6 Maximum Speed

743°/s

J4 / J5 Allowable Torque

20 N·m

J6 Allowable Torque

11 N·m

J4 / J5 Allowable Inertia

0.5 kg·m²

J6 Allowable Inertia

0.16 kg·m²

Operating Temperature

0–45°C

Operating Humidity

20–80% RH, non-condensing

Robot Body Interface

16-pin, 2 × Φ8 mm

Robot Weight

170 kg

Mounting Options

Floor, inverted, side

Robot Body Protection

IP54

Wrist Protection

IP67

 

 

System Integration and Customization

 

A robotic laser welding cell needs to match the selected laser source and process equipment with the robot's motion, workpiece positioning, and production layout. CRP provides robot-related options that can be selected to suit the planned installation.

  • Control and operation: G5A control cabinet and teaching pendant options.
  • Connection cables: Standard external interconnection cable length of 5 m, with 8 m, 10 m, and 15 m options.
  • Pendant cable: Available in 6 m, 8 m, 10 m, 12 m, and 15 m lengths.
  • Built-in transformer: 3000 W, 5000 W, and 8000 W options.
  • Interface language: English interface options.
  • Robot color: Available options include blue, telecom gray, red, ASD yellow, FLK yellow, signal white, grass paper, and light gray; other colors can be customized.

For a complete welding cell, buyers should also consider laser source and welding head compatibility, wire-feeding equipment, workpiece fixtures, protective enclosures, and the required safety interlocks. The final system scope depends on the intended process and workstation design.

 

Contact Us

 

 

Applications

 

The 1000W / 1500W Laser Welding Robot is suited to automated production setups where robotic movement and laser process control are required for repeatable welding paths.

  • Metal fabrication: Automated welding tasks involving metal components and fabricated assemblies.
  • Sheet metal production: Robotic welding of suitable sheet-metal parts, depending on material, thickness, joint design, and process settings.
  • Component manufacturing: Repetitive welding paths for components produced in batches.
  • Automated welding cells: Integration with fixtures, workpiece positioning equipment, and compatible laser welding systems.
  • Flexible production layouts: Installations requiring floor, inverted, or side-mounted robot placement.

 

 

Quality Control

 

CRP applies quality checks across material intake, component production, assembly, and final inspection to support consistent robot manufacturing.

  • Incoming inspection: Checks may cover component dimensions, hardness, material composition, and appearance.
  • Machined-part inspection: Three-coordinate measurement is used for castings and machined components.
  • Production traceability: QR-code tracking supports identification through manufacturing processes.
  • Assembly and component checks: Core components are inspected during production and assembly.
  • Aging and performance tests: Testing includes up to 24-hour maximum-load aging, repeat-positioning checks, noise and abnormal-sound checks, and control-cabinet compatibility.
  • Final inspection: Completed robots undergo final checks before shipment.

 

 

Why Choose CRP?

 

CRP combines robot development, manufacturing, and application support for industrial automation projects.

  • Robotics experience: Robot control-system development dates to 2007, followed by the establishment of the robotics business in 2012.
  • Manufacturing resources: The company reports a production base exceeding 35,000 m².
  • R&D and intellectual property: CRP reports more than 400 intellectual-property rights, including over 40 invention patents.
  • Application experience: Robots have been supplied to customers in multiple international markets, supporting a range of industrial automation needs.

These company capabilities provide a broader manufacturing and technical foundation for buyers planning robotic welding equipment and related automation projects.

 

 

FAQ

 

Q: How should I choose between the 1000W and 1500W options?

A: Base the selection on the material, workpiece thickness, joint type, welding speed target, and required weld quality. Laser source and welding-head compatibility should also be considered. Application details are needed to determine which power option is suitable for the intended process.

Q: Can the robot be integrated into an existing production line?

A: The robot can be considered for integration into an automated workstation or production line. Compatibility depends on the existing control system, laser equipment, fixtures, safety arrangements, and communication requirements.

Q: Does the system support wire-fed laser welding?

A: Yes. The described system supports dual-mode servo and stepper-motor wire feeding for wire diameters from 0.6 to 2.0 mm. The appropriate wire and process setup depends on the material and welding application.

Q: Can the robot be installed in different orientations?

A: Floor, inverted, and side mounting are listed as supported mounting options. The installation layout should account for the robot's working envelope, workpiece access, cable routing, and safety requirements.

Q: Can the robot be used for laser cutting or cladding?

A: The robot platform may be configured for laser cutting, laser cladding, and other automated material-processing tasks when compatible process equipment, software, and system integration are provided. These applications require a suitable process-specific setup.

 

 

Hot Tags: 1000w / 1500w laser welding robot, China 1000w / 1500w laser welding robot manufacturers, suppliers, factory

Get in Touch with CRP

Get the robotics solution today! Leave a message for more information about our robot series, and request a quote or expert advice.

map

CRP Global Service Network

 
X

Quote Now!

Receive a response within one business day. Please look out for emails from " frank.fang@crprobot.com " to ensure timely and efficient communication.
Please send your logo and design to the email, we provide solutions within 24 hours.