Product Description
Robotic Laser Welding Machine for Automated Precision Welding
The Robotic Laser Welding Machine is designed for automated laser welding of metal components in industrial production environments. Its robotic welding configuration combines multi-axis movement with precise laser control to perform consistent welds across complex workpieces and hard-to-reach seams. With high-speed operation and low heat input, it is well suited for applications such as sheet metal fabrication, automotive components, stainless steel products, precision metal parts, and other production processes requiring stable and repeatable welding quality.
Advantages of CRP Robotic Laser Welding Machine
The CRP Robotic Laser Welding Machine is designed for stable and precise automated welding across a range of industrial production applications.
Six-Axis Flexibility
The six-axis robotic structure provides flexible movement around complex workpieces and welding seams. With a 1554 mm operating radius, the robot can access a broad working area and support floor, inverted, and side mounting configurations.
High Positioning Accuracy
With ±0.05 mm repeated positioning accuracy, the robot supports precise and consistent movement during automated welding cycles. Stable positioning helps maintain repeatable weld paths across continuous production.
Integrated Welding Control
The welding system integrates laser power control, wire feeding, soft start and stop, pre-attenuation, wire sticking detection, and wire pre-drawing and filling. These functions allow key welding operations to be coordinated through the robotic system.
Precise Wire Feeding
The dual-mode servo and stepper wire feeding system supports 0.6–2.0 mm welding wires with controlled feeding performance. It is suitable for wire-fed welding processes involving materials such as stainless steel and aluminum alloys.
Compact Control Cabinet
The integrated electrical cabinet is approximately 35% smaller than conventional configurations, helping reduce the installation space required for the welding system. Its single-phase 220 V input also simplifies electrical integration in suitable production environments.
Power-Failure Protection
The integrated industrial UPS provides backup power protection during unexpected power interruptions. With a switching response of ≤5 ms, it helps protect the welding system from sudden power loss during operation.
Technical Parameters
|
Model |
CRP-RA15-12-J |
|
|
Number of motion axis |
6 |
|
|
End load |
12kg |
|
|
Operating radius |
1554mm |
|
|
Repeatability accuracy |
±0.05mm |
|
|
Maximum angle of each axis |
J1 |
Ground/upside down mounting -167°~167°, wall mounting -30°~30° |
|
J2 |
-155°~90° |
|
|
J3 |
-85°~155° |
|
|
J4 |
-190°~190° |
|
|
J5 |
-105°~130° |
|
|
J6 |
-210°~210° |
|
|
Joint maximum speed |
J1 |
169°/S |
|
J2 |
169°/S |
|
|
J3 |
169°/S |
|
|
J4 |
301°/S |
|
|
J5 |
220°/S |
|
|
J6 |
743°/S |
|
|
Allowable torque |
J4 |
20N.m |
|
J5 |
20N.m |
|
|
J6 |
11N.m |
|
|
Permissible moment of inertia |
J4 |
0.5kg.m² |
|
J5 |
0.5kg.m² |
|
|
J6 |
0.16kg.m² |
|
|
Install environment |
Temperature 0~45°C, Humidity 20%~80%RH(no condensation) |
|
|
Body interface |
16Pin |
|
|
Body weight |
170kg |
|
|
Installation method |
Formal installation, inverted installation, side installation |
|
|
IP level |
Body IP54, Wrist IP67 |
|
Diagram
Installation Interface Diagram

Motion Range Diagram

Customize CRP Robotic Laser Welding Machine
We can adjust key configurations to better match your installation conditions, control requirements, and project specifications.
Interconnection Cable Length
The standard external interconnection cable is 5 m, with 8 m, 10 m, and 15 m options available. Custom cable lengths can also be provided for different equipment layouts.
Transformer Power
The built-in transformer is available in 3000W, 5000W, and 8000W configurations. Other transformer specifications can be provided upon request.
Teach Pendant
Choose between Model E and Model C teach pendants according to your preferred robot operation and programming configuration.
Teach Pendant Cable Length
Teach pendant cables are available in 6 m, 8 m, 10 m, 12 m, and 15 m lengths. Other cable lengths can be customized according to your installation requirements.
System Interface
The system can be supplied with an English interface using CRP screen labels. Alternative English interface labels are also available for projects with specific interface requirements.
Robot Color
Standard color options include blue, telecom gray, red, yellow ASD, yellow FLK, signal white, grass paper, and light gray. Other colors can also be customized, with a 45-day lead time.
CRP Customization Process for Robotic Laser Welding Machine
CRP manages each customized robot project through a structured process, from initial evaluation and design to production and final testing.
Each customized robot project is developed according to the customer's specific application and configuration requirements.
- In-House Evaluation - Reviews workpiece, handling, layout, and technical requirements to define the project specifications.
- Conceptual Design - Develops the robot configuration, tooling, interfaces, and installation arrangement for the application.
- Raw Material Preparation - Prepares the mechanical, electrical, pneumatic, and other components required for production.
- Mass Production - Manufactures and assembles the customized robot according to the approved design and production requirements.
- Performance Testing - Tests robot motion, positioning accuracy, load handling, and customized functions against the specified requirements.
- Automated Testing - Checks key robot functions and operating performance through standardized automated procedures.
- Sample Completion - Completes final inspection and prepares the customized robot and relevant materials for delivery.
Quality Management of CRP Industrial Robots
CRP applies quality control throughout material inspection, precision verification, production testing, and final performance evaluation to maintain consistent robot quality before delivery.
- Incoming Material Inspection - Checks hardness, dimensions, material composition, and appearance of incoming materials to verify that core components meet CRP quality requirements.
- Three-Coordinate Inspection - Inspects robot body castings and machined parts for flatness, verticality, concentricity, hole spacing, and aperture before they enter production.
- Digital Production Traceability - Uses QR-code identification after dimensional inspection to connect component data with the production process for traceable quality management.
- Component Quality Control - Performs full inspection of core robot components and manages supplier quality to identify and trace potential batch-level issues.
- Load Aging Testing - Conducts 24-hour maximum-load aging tests to evaluate robot operating stability under continuous load conditions before delivery.
- Performance Testing - Tests positioning accuracy, noise, abnormal sounds, and electrical cabinet compatibility as part of the robot's final performance evaluation.
- Final Quality Inspection - Carries out comprehensive inspections before shipment to verify robot performance and configuration according to the customer's order requirements.
These quality management processes provide traceable inspection and testing from incoming materials through final delivery, supporting consistent performance across CRP industrial robot products.
Why Choose CRP as Your Industrial Robot Manufacturer?
CRP combines robotics R&D, manufacturing, and technical expertise to support industrial automation projects.
Longstanding Industry Experience
CRP has been developing robot control systems since 2007 and established its robotics company in 2012. Its more than 35,000 m² industrial robot base covers R&D and production of industrial robots, controllers, drive and control systems, and other core components.
Proven Technical Expertise
CRP has more than 400 authorized intellectual property rights, including over 40 invention patents. Its technical capabilities cover robot control, drive systems, intelligent sensing, and complete industrial robot development.
Controlled Production and Quality Management
CRP manages key production processes for industrial robots and core components within its manufacturing system. This integrated approach supports consistency across robot assembly, component integration, testing, and final delivery.
Established Global Experience
CRP has served more than 500 clients worldwide, with its robots exported to Southeast Asia, India, Pakistan, Turkey, Europe, and Latin America. Its industrial robots are used across handling, welding, palletizing, spraying, polishing, and grinding applications.
Comprehensive Service Support from CRP for Your Robot Projects
CRP provides technical and service support from robot installation and training through long-term after-sales maintenance.
On-Site Technical Support
CRP provides on-site assistance when technical support is required during robot deployment.
On-site support includes:
• On-site robot inspection
• Installation guidance
• Commissioning support
• Technical troubleshooting
• On-site technical assistance
Robot Training Services
CRP provides training based on the customer's robot application and operational requirements.
Training includes:
• Robot product training
• Robot operation training
• Programming training
• Maintenance training
• On-site training support
Long-Term After-Sales Service
CRP provides ongoing support after the robot has been delivered and put into operation.
After-sales support includes:
• 2-year robot warranty
• Repair support for up to 5 years after product discontinuation
• Replacement support for up to 10 years
• Spare parts availability
FAQ
Q: Does the Robotic Laser Welding Machine require an operator during welding?
A: The robot performs the programmed welding movements automatically once the welding process and workpiece positioning have been set. Operator involvement is mainly required for workpiece loading and unloading, process monitoring, programming adjustments, and routine equipment operation.
Q: How is a new welding job programmed on the robot?
A: New welding jobs can be programmed through the robot's teach pendant. The operator can define robot movements and welding positions according to the required weld path, then save the program for repeated production.
Q: Can one robot weld different workpieces?
A: Yes. Different welding programs can be created for different workpieces. When multiple products share the same robotic welding cell, the appropriate program can be selected according to the workpiece being processed.
Q: What is the role of the teach pendant in robotic laser welding?
A: The teach pendant is used for robot operation, movement teaching, program setup, and related parameter adjustments. CRP offers Model E and Model C teach pendant options for different robot operation and programming requirements.
Q: Can robotic laser welding replace manual welding in repetitive production?
A: It can automate repetitive welding movements and maintain consistent programmed positioning across production cycles. This makes the robot particularly suitable for production processes where the same or similar weld paths are repeated frequently.
Q: What should be considered when designing the welding workstation?
A: The workstation should provide sufficient space for the robot's movement, workpiece loading and unloading, fixture installation, laser welding equipment, and operator access where required. The workpiece position and welding access should also be arranged to keep the required weld seams within the robot's working range.
Hot Tags: robotic laser welding machine, China robotic laser welding machine manufacturers, suppliers, factory

