Products Description

The CRP-RA15-12-J laser welding robot system mainly consists of two parts: the robot body and a dedicated electrical control cabinet.

The equipment comes pre-installed with laser welding software, allowing for immediate production use upon unpacking and meeting the demands of high-precision industrial processing.

This integrated laser robot can be used for laser welding, laser cutting, laser cladding, and other processes. In high-precision material processing scenarios, it operates stably and delivers consistent results.

Characteristics of Robot Performance

● Dedicated Laser Welding Interface
Integrated laser welding process functions such as power control, wire feeding, soft start/stop, pre-attenuation, wire sticking detection, and pre-drawing and wire filling meet high-precision cladding requirements.

● Rigid High-Precision Motion
The reinforced robotic arm design delivers ±0.02mm repeatability, zero jitter during welding, and ensures continuous laser beam stability.

● Dual-Mode Servo & Stepper Wire Feeding System
Supports dual-control wire feeding via servo and stepper motors, enabling precise speed control for 0.6-2.0mm wires and suitable for welding processes involving materials such as stainless steel and aluminum alloys.

● Vertical Teaching Pendant for Efficient Programming
The ergonomic vertical teach pendant reduces programming time for the CRP-RA15-12-J by 40% compared to traditional models.

● Compact Integrated Cabinet
The cabinet is 35% smaller and can be directly embedded into the laser host. It supports single-phase 220V input, allowing for quick deployment without modifying the workshop power grid.

● Built-in Industrial UPS
The built-in UPS power failure protection system switches to a backup power source in ≤5ms after an unexpected power outage. Upon power restoration, welding resumes automatically, eliminating scrapped parts.

● Contains
Entity: CRP-RA15-12-J
Electrical cabinet: G5A
Teaching Pendant: Vertical Teaching Pendant, cable length 6 meters
Operation box: 2 (with 5 - meter cable)
Control cabinet and main body interconnection cable 5 meters
Welding wire drum and stand
Optional two external axes

Robot Body Technical Parameters

Model		CRP-RA15-12-J
Number of motion axis		6
End load		12kg
Operating radius		1554mm
Repeatability accuracy		±0.05mm
Maximum angle of each axis	J1	Ground/upside down mounting -167°~167°, wall mounting -30°~30°
	J2	-155°~90°
	J3	-85°~155°
	J4	-190°~190°
	J5	-105°~130°
	J6	-210°~210°
Joint maximum speed	J1	169°/S
	J2	169°/S
	J3	169°/S
	J4	301°/S
	J5	220°/S
	J6	743°/S
Allowable torque	J4	20N.m
	J5	20N.m
	J6	11N.m
Permissible moment of inertia	J4	0.5kg.m²
	J5	0.5kg.m²
	J6	0.16kg.m²
Install environment		Temperature 0~45°C, Humidity 20%~80%RH(no condensation)
Body interface		16Pin 2*Φ8mm
Body weight		170kg
Installation method		Formal installation, inverted installation, side installation
IP level		Body IP54, Wrist IP67