Product Description
3D Laser Welding Robot for Complex Metal Components
The CRP 3D Laser Welding Robot is designed for automated laser welding of three-dimensional metal components and complex weld seams. Its multi-axis robotic structure enables the welding head to move along different spatial orientations, supporting precise and repeatable welding on curved surfaces, angled joints, and irregular workpieces. It is suitable for applications including automotive components, machinery parts, stainless steel products, sheet metal fabrication, and other precision metal manufacturing processes.
Advantages of CRP 3D Laser Welding Robot
The CRP 3D Laser Welding Robot integrates dedicated welding controls and practical system configurations for stable laser welding production.
Coordinated Welding Functions
Laser power modulation, wire feeding, soft start and stop, pre-laser emission, wire sticking detection, and wire replenishment are managed within the welding control system. This reduces the need to coordinate these functions through separate controls during operation.
Consistent Filler-Wire Feeding
The dual-mode servo and stepper wire feeding system supports 0.6–2.0 mm welding wire. Controlled wire delivery helps maintain a consistent filler supply when welding with different wire specifications.
Repeatable Welding Performance
The referenced configuration provides repeat positioning accuracy of up to ±0.02 mm. Stable repeatability helps reproduce programmed welding operations consistently across production cycles.
Built-In Process Protection
An industrial UPS provides a ≤5 ms power-failover response to protect the system during unexpected power interruptions. This helps minimize disruption to welding operations caused by sudden power loss.
Reduced Control Cabinet Footprint
The embedded electrical cabinet is approximately 35% smaller than conventional configurations. The reduced cabinet footprint provides more flexibility when arranging the robot and auxiliary equipment within the welding area.
Straightforward Electrical Integration
The system uses single-phase 220 V input, providing a practical power connection for suitable production facilities. This can simplify electrical preparation when integrating the welding robot into an existing workshop.
Technical Parameters
|
Model |
CRP-RA20-12-J |
|
|
Number of motion axis |
6 |
|
|
End load |
12kg |
|
|
Operating radius |
2015mm |
|
|
Repeatability accuracy |
±0.08mm |
|
|
Maximum angle of each axis |
J1 |
Ground/upside down mounting -167°~167°, wall mounting -30°~30° |
|
J2 |
-50°~170° |
|
|
J3 |
-8°~155° |
|
|
J4 |
-190°~190° |
|
|
J5 |
-135°~135° |
|
|
J6 |
-210°~210° |
|
|
Joint maximum speed |
J1 |
170°/S |
|
J2 |
170°/S |
|
|
J3 |
200°/S |
|
|
J4 |
350°/S |
|
|
J5 |
350°/S |
|
|
J6 |
540°/S |
|
|
Allowable torque |
J4 |
40N.m |
|
J5 |
40N.m |
|
|
J6 |
13N.m |
|
|
Permissible moment of inertia |
J4 |
1.3kg.m² |
|
J5 |
1.3kg.m² |
|
|
J6 |
0.43kg.m² |
|
|
Install environment |
Temperature 0~45°C, Humidity 20%~80%RH (no condensation) |
|
|
Body interface |
16Pin |
|
|
Body weight |
170kg |
|
|
Installation method |
Formal installation, inverted installation, side installation |
|
|
IP level |
Body IP54, Wrist IP67 |
|
Diagram
Installation Interface Diagram

Motion Range Diagram

Customize CRP 3D Laser Welding Robot
We can adjust key configurations to better match your installation conditions, control requirements, and project specifications.
Interconnection Cable Length
The standard external interconnection cable is 5 m, with 8 m, 10 m, and 15 m options available. Custom cable lengths can also be provided for different equipment layouts.
Transformer Power
The built-in transformer is available in 3000W, 5000W, and 8000W configurations. Other transformer specifications can be provided upon request.
Teach Pendant
Choose between Model E and Model C teach pendants according to your preferred robot operation and programming configuration.
Teach Pendant Cable Length
Teach pendant cables are available in 6 m, 8 m, 10 m, 12 m, and 15 m lengths. Other cable lengths can be customized according to your installation requirements.
System Interface
The system can be supplied with an English interface using CRP screen labels. Alternative English interface labels are also available for projects with specific interface requirements.
Robot Color
Standard color options include blue, telecom gray, red, yellow ASD, yellow FLK, signal white, grass paper, and light gray. Other colors can also be customized, with a 45-day lead time.
CRP Customization Process for 3D Laser Welding Robot
CRP manages each customized robot project through a structured process, from initial evaluation and design to production and final testing.
Each customized robot project is developed according to the customer's specific application and configuration requirements.
- In-House Evaluation - Reviews workpiece, handling, layout, and technical requirements to define the project specifications.
- Conceptual Design - Develops the robot configuration, tooling, interfaces, and installation arrangement for the application.
- Raw Material Preparation - Prepares the mechanical, electrical, pneumatic, and other components required for production.
- Mass Production - Manufactures and assembles the customized robot according to the approved design and production requirements.
- Performance Testing - Tests robot motion, positioning accuracy, load handling, and customized functions against the specified requirements.
- Automated Testing - Checks key robot functions and operating performance through standardized automated procedures.
- Sample Completion - Completes final inspection and prepares the customized robot and relevant materials for delivery.
Quality Management of CRP Industrial Robots
CRP applies quality control throughout material inspection, precision verification, production testing, and final performance evaluation to maintain consistent robot quality before delivery.
- Incoming Material Inspection - Checks hardness, dimensions, material composition, and appearance of incoming materials to verify that core components meet CRP quality requirements.
- Three-Coordinate Inspection - Inspects robot body castings and machined parts for flatness, verticality, concentricity, hole spacing, and aperture before they enter production.
- Digital Production Traceability - Uses QR-code identification after dimensional inspection to connect component data with the production process for traceable quality management.
- Component Quality Control - Performs full inspection of core robot components and manages supplier quality to identify and trace potential batch-level issues.
- Load Aging Testing - Conducts 24-hour maximum-load aging tests to evaluate robot operating stability under continuous load conditions before delivery.
- Performance Testing - Tests positioning accuracy, noise, abnormal sounds, and electrical cabinet compatibility as part of the robot's final performance evaluation.
- Final Quality Inspection - Carries out comprehensive inspections before shipment to verify robot performance and configuration according to the customer's order requirements.
These quality management processes provide traceable inspection and testing from incoming materials through final delivery, supporting consistent performance across CRP industrial robot products.
Why Choose CRP as Your Industrial Robot Manufacturer?
CRP combines robotics R&D, manufacturing, and technical expertise to support industrial automation projects.
Longstanding Industry Experience
CRP has been developing robot control systems since 2007 and established its robotics company in 2012. Its more than 35,000 m² industrial robot base covers R&D and production of industrial robots, controllers, drive and control systems, and other core components.
Proven Technical Expertise
CRP has more than 400 authorized intellectual property rights, including over 40 invention patents. Its technical capabilities cover robot control, drive systems, intelligent sensing, and complete industrial robot development.
Controlled Production and Quality Management
CRP manages key production processes for industrial robots and core components within its manufacturing system. This integrated approach supports consistency across robot assembly, component integration, testing, and final delivery.
Established Global Experience
CRP has served more than 500 clients worldwide, with its robots exported to Southeast Asia, India, Pakistan, Turkey, Europe, and Latin America. Its industrial robots are used across handling, welding, palletizing, spraying, polishing, and grinding applications.
Comprehensive Service Support from CRP for Your Robot Projects
CRP provides technical and service support from robot installation and training through long-term after-sales maintenance.
On-Site Technical Support
CRP provides on-site assistance when technical support is required during robot deployment.
On-site support includes:
• On-site robot inspection
• Installation guidance
• Commissioning support
• Technical troubleshooting
• On-site technical assistance
Robot Training Services
CRP provides training based on the customer's robot application and operational requirements.
Training includes:
• Robot product training
• Robot operation training
• Programming training
• Maintenance training
• On-site training support
Long-Term After-Sales Service
CRP provides ongoing support after the robot has been delivered and put into operation.
After-sales support includes:
• 2-year robot warranty
• Repair support for up to 5 years after product discontinuation
• Replacement support for up to 10 years
• Spare parts availability
FAQ
Q: Can the 3D Laser Welding Robot be equipped with external axes?
A: Yes. The system can be configured with optional external axes when additional workpiece positioning or coordinated movement is required. This can extend the robot's working capability for larger or more demanding welding setups.
Q: What should be considered when selecting the robot's installation position?
A: The robot supports floor, inverted, and side installation. The installation position should be selected according to workpiece access, fixture arrangement, robot movement, and available space around the welding area.
Q: What operating environment is required for the robot?
A: The referenced robot configuration is designed for an ambient temperature of 0–45°C and relative humidity of 20–80% RH without condensation. Keeping the installation environment within these conditions helps maintain stable robot operation.
Q: Can the robot be integrated into an existing laser welding line?
A: Yes. The robot is supplied with an integrated laser welding software system and electrical cabinet, and its configuration can be adapted to the customer's installation and control requirements. This allows it to be incorporated into existing laser welding or metal processing setups.
Q: What auxiliary equipment is normally required for a complete welding setup?
A: A complete setup may include workpiece fixtures, welding wire equipment, laser equipment, protective equipment, and other auxiliary components according to the process. The required configuration is determined by the workpiece and welding process rather than the robot body alone.
Q: How should buyers evaluate whether one robot is sufficient for a welding project?
A: The key factors include the number and position of welds, workpiece dimensions, fixture arrangement, required cycle time, and whether external axes are needed. These factors determine whether the robot can cover the required welding operations within the planned production cycle.
Hot Tags: 3d laser welding robot, China 3d laser welding robot manufacturers, suppliers, factory

