165kg Heavy Duty Spot Welding Robot

165kg Heavy Duty Spot Welding Robot

Details
Maximum payload: 165kg
Maximum reaching distance: 2606mm
Degree of freedom: 6axis
Category
Handling Robot
Share to
Send Inquiry
Description
Technical Parameters

Products Description

 

Heavy-Duty Spot Welding Robot for High-Load Production

The CRP-RH26-165 165kg Heavy Duty Spot Welding Robot is designed for high-load spot welding production lines. Featuring a 165kg payload and a 2.6-meter high-rigidity arm span, it delivers stable, efficient welding for large workpieces. Built with an anti-interference system and internal water and gas circuits, it ensures seamless integration with welding guns and peripheral equipment. It is well suited for automotive body-in-white (BIW) spot welding, heavy chassis assembly, and metal component fabrication.

 

 

 

Advantages of CRP 165kg Heavy Duty Spot Welding Robot

 

The CRP 165kg Heavy Duty Spot Welding Robot delivers superior motion stability, streamlined media integration, and high-density cell adaptability for demanding automated spot welding lines.

Consistent Weld Joint Quality

Advanced servo vibration suppression and synchronized gun timing eliminate end-effector oscillations during rapid positioning. This rigid motion control ensures accurate clamp force and precise spot placement across every welding point, improving joint integrity on heavy automotive assemblies.

Protected Internal Utility Routing

Housing water cooling lines, pneumatic hoses, and power cables within the hollow arm structure prevents external hose snagging against fixtures and tooling. Internalized routing protects media lines from weld spatter and physical friction, significantly extending cable pack service life.

Stable Signal Transmission in High-Current Cells

Integrated three-phase electromagnetic filtering isolates control signal communication from heavy high-frequency welding currents. This ensures uninterrupted robot controller responsiveness and prevents motion interruption when operating alongside large welding transformers.

High-Density Multi-Robot Station Design

A slim physical footprint combined with internal dress pack management allows multiple heavy-duty robots to operate closely within the same workstation. This enables simultaneous multi-spot welding on large workpieces while maximizing shop-floor space utilization.

Reduced Cell Commissioning Time

A modular architecture combined with intuitive programming interfaces speeds up tool TCP setup, trajectory teaching, and parameter tuning. This streamlined setup workflow improves line integration and maintenance efficiency by over 30%.

Flexible Tooling Capacity

The 165 kg payload capacity easily accommodates heavy servo spot welding guns along with integrated transformers, water-gas control units, and quick-change adapters, providing greater flexibility when configuring heavy tooling for diverse workpiece geometries.

 

 

 

Technical Parameters

 

Model

CRP-RH26-165

Arm form

Vertical multiple joints

Degree of freedom

6 axis

Maximum payload

165kg

Maximum payload

165kg

Maximum travel

Axis 1

-175°~175°

Axis 2

-76°~64°

Axis 3

-74°~100°

Axis 4

-200°~200°

Axis 5

-125°~125°

Axis 6

-360°~360°

Maximum speed

Axis 1

130°/S

Axis 2

110°/S

Axis 3

130°/S

Axis 4

175°/S

Axis 5

170°/S

Axis 6

280°/S

Allowable torque

Axis 4

960N.m

Axis 5

960N.m

Axis 6

500N.m

Allowable moment of inertia

Axis 4

100kg.m²

Axis 5

100kg.m²

Axis 6

50kg.m²

Repeated positioning accuracy

±0.06mm

Maximum reaching distance

2606mm

Robot body weight

1270kg

Installation mode

Ground

Noise level

80dB(A)

Body interface

Reserved IO

26Pin

Reserved gas

2*φ12mm

Installation environment

Ambient temperature

0-45°C

Relative humidity

35%-85%RH(no condensation)

Vibration

Under 0.5G

Others

Robot installation must be away from: flammable or corrosive liquids or gases, electrical sources of interference

IP level

Body IP54, Wrist IP67

Advantage features

Compact structure, high speed, high precision, high rigidity, high life, high expansibility and easy operation

Application

Handling, spot welding, cutting, assembly, marking, grinding

Electric cabinet configuration

G15A

 

*Measurement conditions
(1) The robot is firmly fixed on a flat ground;
(2) Test at 3700mm away from the center of rotation of joint JT1; noise level changes according to the conditions, background noise has a certain impact

 

 

 

Diagram

 

Installation Interface Diagram

1

 

2

 

Motion Range Diagram

image

 

 

 

Customize 165kg Heavy Duty Spot Welding Robot for Your Projects

 

We can adjust key configurations to better match your installation conditions, control requirements, and project specifications.

Interconnection Cable Length

The standard external interconnection cable is 5 m, with 8 m, 10 m, and 15 m options available. Custom cable lengths can also be provided for different equipment layouts.

Transformer Power

The built-in transformer is available in 3000W, 5000W, and 8000W configurations. Other transformer specifications can be provided upon request.

Teach Pendant

Choose between Model E and Model C teach pendants according to your preferred robot operation and programming configuration.

Teach Pendant Cable Length

Teach pendant cables are available in 6 m, 8 m, 10 m, 12 m, and 15 m lengths. Other cable lengths can be customized according to your installation requirements.

System Interface

The system can be supplied with an English interface using CRP screen labels. Alternative English interface labels are also available for projects with specific interface requirements.

Robot Color

Standard color options include blue, telecom gray, red, yellow ASD, yellow FLK, signal white, grass paper, and light gray. Other colors can also be customized, with a 45-day lead time.

 

Build Your Custom Robot

 

 

 

Quality Management of CRP Industrial Robots

 

CRP applies quality control throughout material inspection, precision verification, production testing, and final performance evaluation to maintain consistent robot quality before delivery.

  • Incoming Material Inspection - Checks hardness, dimensions, material composition, and appearance of incoming materials to verify that core components meet CRP quality requirements.
  • Three-Coordinate Inspection - Inspects robot body castings and machined parts for flatness, verticality, concentricity, hole spacing, and aperture before they enter production.
  • Digital Production Traceability - Uses QR-code identification after dimensional inspection to connect component data with the production process for traceable quality management.
  • Component Quality Control - Performs full inspection of core robot components and manages supplier quality to identify and trace potential batch-level issues.
  • Load Aging Testing - Conducts 24-hour maximum-load aging tests to evaluate robot operating stability under continuous load conditions before delivery.
  • Performance Testing - Tests positioning accuracy, noise, abnormal sounds, and electrical cabinet compatibility as part of the robot's final performance evaluation.
  • Final Quality Inspection - Carries out comprehensive inspections before shipment to verify robot performance and configuration according to the customer's order requirements.

These quality management processes provide traceable inspection and testing from incoming materials through final delivery, supporting consistent performance across CRP industrial robot products.

CRP Industrial Robotics Testing Center

 

 

 

Why Choose CRP as Your Industrial Robot Manufacturer?

 

CRP combines robotics R&D, manufacturing, and technical expertise to support industrial automation projects.

Longstanding Industry Experience

CRP has been developing robot control systems since 2007 and established its robotics company in 2012. Its more than 35,000 m² industrial robot base covers R&D and production of industrial robots, controllers, drive and control systems, and other core components.

Proven Technical Expertise

CRP has more than 400 authorized intellectual property rights, including over 40 invention patents. Its technical capabilities cover robot control, drive systems, intelligent sensing, and complete industrial robot development.

Controlled Production and Quality Management

CRP manages key production processes for industrial robots and core components within its manufacturing system. This integrated approach supports consistency across robot assembly, component integration, testing, and final delivery.

Established Global Experience

CRP has served more than 500 clients worldwide, with its robots exported to Southeast Asia, India, Pakistan, Turkey, Europe, and Latin America. Its industrial robots are used across handling, welding, palletizing, spraying, polishing, and grinding applications.

 

 

 

Comprehensive Service Support from CRP for Your Robot Projects

 

CRP provides technical and service support from robot installation and training through long-term after-sales maintenance.

On-Site Technical Support

CRP provides on-site assistance when technical support is required during robot deployment.
On-site support includes:
• On-site robot inspection
• Installation guidance
• Commissioning support
• Technical troubleshooting
• On-site technical assistance

Robot Training Services

CRP provides training based on the customer's robot application and operational requirements.
Training includes:
• Robot product training
• Robot operation training
• Programming training
• Maintenance training
• On-site training support

Long-Term After-Sales Service

CRP provides ongoing support after the robot has been delivered and put into operation.
After-sales support includes:
• 2-year robot warranty
• Repair support for up to 5 years after product discontinuation
• Replacement support for up to 10 years
• Spare parts availability

 

Discuss Your Project

 

 

 

FAQ

 

Q: Can a 165kg load handle heavy welding, such as that on automotive chassis?

A: Designed specifically for heavy-duty spot welding, the high-rigidity arm can stably support large welding guns and workpieces, making it suitable for welding automotive and construction machinery components.

Q: How does the built-in air and water circuit simplify production lines?

A: Integrated 12mm diameter dual air circuits (for torch shielding gas and fixture drive) and 19.5mm diameter dual water circuits (for torch cooling): This eliminates 90% of external piping and eliminates the risk of entanglement and leakage.

Q: How is electromagnetic interference handled when multiple robots are working together?

A: Built-in industrial-grade three-phase filter: EMC/EMI certified; signal interference from adjacent robots is reduced by 70%*.

Q: How much is the efficiency improvement compared to traditional welding machines?

A: Three major acceleration technologies:
High-speed servo motor (0.02s response time)
Torch path optimization algorithm
Vibration reduction reduces positioning time
Overall cycle time is reduced by ≥15%

 

 

Hot Tags: 165kg heavy duty spot welding robot, China 165kg heavy duty spot welding robot manufacturers, suppliers, factory

Get in Touch with CRP

Get the robotics solution today! Leave a message for more information about our robot series, and request a quote or expert advice.

map

CRP Global Service Network

 
X

Quote Now!

Receive a response within one business day. Please look out for emails from " frank.fang@crprobot.com " to ensure timely and efficient communication.
Please send your logo and design to the email, we provide solutions within 24 hours.