Product Overview
The Automotive Parts Laser Welding Robot automates laser welding for suitable metal components used in automotive manufacturing. Its six-axis motion system and ±0.05 mm repeatability support programmed welding paths for batch production.
Designed for integration with compatible laser equipment and fixtures, the robot can be used in automotive component welding cells where joint accessibility, workpiece positioning, and production-cycle requirements have been evaluated.
Key Features
Flexible Access to Automotive Weld Joints
Six-axis movement allows the welding head to approach suitable joints from different directions. This is useful for components with angled surfaces, multiple weld locations, or three-dimensional geometries, provided the required paths fit within the robot's working envelope and maintain adequate tool clearance.
01
Repeatable Movement for Batch Production
Repeatability of ±0.05 mm supports consistent robot positioning across programmed production cycles. Actual weld consistency also depends on fixture accuracy, part variation, joint fit-up, and laser process conditions.
02
Coordinated Laser Welding Functions
The robot supports integration with compatible laser welding equipment and wire-feeding systems. Its welding interface provides functions for coordinating laser power and wire-feeding operations within the programmed process.
03
Integration into Automated Production Cells
Floor, inverted, and side mounting options give system integrators flexibility when planning robot placement. The robot can be incorporated into cells with compatible laser equipment, fixtures, and part-handling systems, subject to the layout and process requirements.
04
Protection for Industrial Environments
The robot body is rated IP54 and the wrist IP67. These ratings help buyers assess equipment suitability for the intended installation environment, alongside the conditions affecting the welding head, cables, fixtures, and other cell components.
05
Technical Specifications
Robot Motion and Working Range
|
Parameter |
Specification |
|
Maximum Payload |
12 kg |
|
Maximum Reach |
1510 mm |
|
Number of Axes |
6 |
|
Repeatability |
±0.05 mm |
|
J1 Axis Range |
Floor/inverted: −167° to +167°; wall-mounting angle: −30° to +30° |
|
J2 Axis Range |
−155° to +90° |
|
J3 Axis Range |
−85° to +155° |
|
J4 Axis Range |
−190° to +190° |
|
J5 Axis Range |
−105° to +130° |
|
J6 Axis Range |
−210° to +210° |
Maximum Joint Speed
|
Axis |
Maximum Speed |
|
J1 |
169°/s |
|
J2 |
169°/s |
|
J3 |
169°/s |
|
J4 |
301°/s |
|
J5 |
220°/s |
|
J6 |
743°/s |
Wrist Load Characteristics
|
Parameter |
J4 |
J5 |
J6 |
|
Allowable Torque |
20 N·m |
20 N·m |
11 N·m |
|
Permissible Moment of Inertia |
0.5 kg·m² |
0.5 kg·m² |
0.16 kg·m² |
Installation and Operating Conditions
|
Parameter |
Specification |
|
Installation Positions |
Floor, inverted, side; J1 wall-mounting angle as specified |
|
Operating Temperature |
0–45°C |
|
Relative Humidity |
20–80%, non-condensing |
|
Robot Body Protection |
IP54 |
|
Wrist Protection |
IP67 |
|
Robot Weight |
170 kg |
|
Body Interface |
16-pin interface; 2 × Φ8 mm connections |
Laser Welding Interface and Control
|
Item |
Description |
|
Laser Power Functions |
Controllable laser power, pre-laser emission, and power decay |
|
Start/Stop Functions |
Soft start and stop |
|
Wire-Feeding Functions |
Wire-sticking detection, pre-wire extraction, and wire replenishment |
|
Wire Feeder Control |
Servo or stepper motor wire feeder control |
|
Teaching |
Vertical teaching pendant |
|
Electrical Cabinet |
Compact G5A electrical cabinet for integration with the laser host |
|
Power Input |
Single-phase 220 V |
|
Power Recovery Support |
Built-in UPS supports recovery after a power outage |
Applications
The robot is suitable for metal components whose materials, joint geometry, accessibility, and production requirements match the robot's working range and the selected laser welding process.
- Automotive body components: Suitable metal parts and assemblies with accessible laser welding joints.
- Chassis components: Selected structural parts and brackets within the robot's payload and reach limits.
- Brackets and supports: Components with defined joint locations suitable for programmed welding paths.
- Door and seat structures: Suitable metal subassemblies requiring repeatable welding movements.
- Exhaust system components: Applicable metal parts where material and joint conditions support laser welding.
- New energy vehicle components: Selected metal assemblies, subject to material and process suitability.
- Automated production cells: Repetitive welding tasks integrated with compatible laser equipment, fixtures, and part-handling systems.
Automotive Welding Cell Integration
Successful deployment depends on how the robot, laser equipment, fixtures, and workpiece handling operate together. Key project considerations include:
- Workpiece and joint requirements: Review component drawings, material, thickness, joint type, and weld locations.
- Robot reach and tool clearance: Check that the welding head can reach each joint without collisions along the programmed path.
- Laser equipment compatibility: Evaluate the laser source, welding head, wire feeder where required, and control interfaces.
- Fixtures and part handling: Determine how components will be located, restrained, loaded, and unloaded.
- Production sequence and cycle time: Assess weld order, robot travel, equipment coordination, and the required production rhythm.
- Process evaluation: Use representative parts and welding requirements to evaluate process suitability before finalizing the production approach.
Discuss Your Automotive Welding Project
Why Choose CRP for Automotive Welding Projects
Automotive Application Experience
CRP's automotive application coverage includes body parts, chassis components, new energy vehicle systems, and other automotive assemblies. This experience across automotive application areas provides relevant context when evaluating robot selection and automation requirements for component production.
Robot and Control System Capabilities
CRP develops industrial robots and robot control systems. Its laser welding interface supports coordination between robot movement and welding-related functions, providing a basis for integration with compatible laser equipment and other production-cell components.
Process Evaluation and Project Support
CRP provides process evaluation resources, including sampling, testing, and validation for project requirements. Installation, commissioning, troubleshooting, and training support are also available to help customers implement and operate robotic automation systems.
FAQ
Q: What information should buyers provide for an automotive laser welding project?
A: Useful starting materials include component drawings or 3D files, workpiece material and thickness, joint details, weld locations, expected production volume, and the intended cell layout. These details help the project team assess robot access, equipment compatibility, fixtures, and process requirements.
Q: How should the robot's mounting position be selected?
A: The choice between floor, inverted, and side mounting depends on workpiece access, welding-head orientation, fixture arrangement, surrounding equipment, and available installation space. The selected position should allow the robot to reach the required weld locations while maintaining tool clearance throughout the programmed path.
Q: What should be evaluated when comparing complete laser welding solutions?
A: Compare the robot's working range and payload alongside laser source compatibility, welding-head access, fixture repeatability, part-handling arrangements, control interfaces, safety provisions, and expected cycle time. Evaluating the complete cell is more useful than comparing robot specifications alone.
Q: Can the robot's maximum joint speed be used to estimate production output?
A: Maximum joint speed is only one factor. Actual output also depends on the welding path, number of joints, travel distance, laser processing time, part loading and unloading, fixture operation, and coordination with other equipment. Cycle time should be evaluated against the intended process and production sequence.
Q: How can buyers assess whether the proposed process is suitable before deployment?
A: Provide representative workpieces and define the required joint and weld acceptance criteria for process evaluation. Sampling and testing can help assess whether the proposed welding approach meets the project's needs before the production cell is finalized.
Hot Tags: automotive parts laser welding robot, China automotive parts laser welding robot manufacturers, suppliers, factory

