More Efficient Welding Setup & Production
Direct torch positioning, one-touch handle control, and six-axis movement help reduce preparation work, simplify repetitive welding operations, and make better use of available production resources.
Less Time Spent Positioning the Welding Torch
Moving the handle in the desired direction moves the torch accordingly, allowing operators to position it along the required welding path without repeatedly adjusting it through complex programming commands.
01
Fewer Adjustments Before Welding Starts
One-touch switching to handle mode allows operators to align the welding wire with the target weld point directly, reducing repeated positioning adjustments during welding preparation.
02
More Tasks Handled by One Robot
Manual adjustment of torch angle and orientation allows the robot to approach different joint positions, while its six-axis movement expands the range of welding tasks that can be handled within its working envelope.
03
Skilled Welders Can Focus on More Demanding Work
By simplifying torch positioning and automating repetitive welding movements, the robot allows experienced welders to spend more time on workpiece preparation, complex joints, and welding quality inspection.
04
Key Applications: Metal Fabrication & Machinery Manufacturing
In metal fabrication and machinery manufacturing, the robot can support repetitive welding of metal frames, equipment bases, sheet metal enclosures, and structural assemblies, helping manufacturers manage varied welding tasks with more consistent operation.
05
Robot Body Technical Parameters
|
Number of axis |
6 axis |
|
|
Maximum load |
5kg |
|
|
Maximum reaching distance |
906mm |
|
|
Repeated positioning accuracy |
±0.02mm |
|
|
Robot body weight |
22.5kg |
|
|
Maximum travel |
J1 |
±360° |
|
J2 |
±360° |
|
|
J3 |
-78°~256° |
|
|
J4 |
±210° |
|
|
J5 |
±360° |
|
|
J6 |
±210° |
|
|
Maximum speed |
J1 |
225°/S |
|
J2 |
225°/S |
|
|
J3 |
225°/S |
|
|
J4 |
250°/S |
|
|
J5 |
250°/S |
|
|
J6 |
250°/S |
|
|
IP level |
IP54 |
|
|
Electrical cabinet configuration |
X2 collaborative electric box |
|
Installation Interface Diagram

The Movement Range of the Robot

Reliable Operation & Easier Deployment
The integrated handle, 6-axis robot arm, and lightweight collaborative design work together to simplify welding operation and workstation setup, with production testing helping verify the robot's key performance before delivery.
The Control Handle Brings Key Operations Together
The 3D joystick and eight-button control handle support drag teaching, operating mode selection, and welding parameter adjustment, bringing essential robot controls into one integrated unit.
Repeated Positioning and Load Stability Tests
Repeated positioning accuracy and load operation stability tests help verify the robot's ability to return to programmed positions and maintain stable movement under the specified load.
A 22.5 kg Robot Body Simplifies Handling
The lightweight robot body is easier to handle and position during installation, while its six-axis movement provides flexibility when arranging the welding area.
One System: From Robot Arm to Mobile Welding Trolley
The robot body, integrated control handle, and mobile welding trolley form a coordinated welding setup that can be moved between suitable work areas and adapted to different production tasks.
6-Axis Welding: Different Workpieces & Joint Positions
With six-axis movement, the robot adjusts torch positions and angles to handle different welding paths across metal frames, sheet metal enclosures, machinery parts, and fabricated components.
Welding Metal Frames & Structural Components
The robot adjusts its arm position and torch angle to weld corners, intersections, and angled joints on metal frames, equipment supports, and structural assemblies.
Welding Sheet Metal Parts & Enclosures
The six-axis movement allows the torch to approach edges, side panels, and corner joints from different directions when welding electrical cabinets, metal housings, and sheet metal boxes.
Welding Machinery Parts & Metal Assemblies
The robot repositions the torch to follow different joint paths on machinery components, equipment bases, and fabricated assemblies, with saved programs available for repetitive production.
Welding Metal Furniture & Fabricated Products
The robot adjusts the torch angle to weld joints between pipes, tubes, and sheet metal components in metal furniture frames, shelving units, and display racks.
Built for Consistent Production and Reliable Supply
From robot assembly and performance testing to welding system configuration and order fulfillment, CRP supports the key requirements involved in purchasing and deploying a 6-axis collaborative welding robot.

Consistent Assembly for Reliable Robot Performance

Movement and Control Checks Before Shipment

Welding Configurations for Different Production Needs

Coordinated Production and Delivery
FAQ
Q: How Do I Choose the Right Collaborative Welding Robot for My Workpieces?
A: Share your workpiece dimensions, material, welding process, joint locations, required payload, and available installation space so our technical team can assess the suitable robot model and configuration.
Q: Can the Collaborative Welding Robot Be Integrated With My Existing Welding Equipment?
A: We can configure the welding system with compatible welding machines, torches, wire feeders, and related equipment, with the final setup depending on your existing equipment specifications and process requirements.
Q: Can I Review the Robot's Performance Before Placing an Order?
A: We can provide 3D models and simulation videos for customized robotic arms, allowing you to review the proposed configuration and functionality; physical samples of customized robotic arms are not currently available.
Q: What MOQ, Lead Time, and Warranty Does CRP Offer for the Collaborative Welding Robot?
A: The standard robot MOQ is 1 set, standard models typically ship within 2–3 days, and customized solutions require at least 7 days, depending on configuration complexity; the robot body comes with a 2-year warranty, while repair support and spare parts replacement are available for up to 5 and 10 years, respectively, after product discontinuation.
Q: How Can I Get a Quote for a 6 Axis Collaborative Welding Robot?
A: Send us your workpiece details, welding process, production requirements, installation conditions, and target order quantity to receive a suitable configuration and quotation.
Hot Tags: 6 axis collaborative welding robot, China 6 axis collaborative welding robot manufacturers, suppliers, factory

